pthrcsdanlenetfrdeelhugaitlvltmkroruskessv

AVISO!
Devido às circunstâncias provocadas pelo COVID-19, a loja do Cacém está encerrada sábado e domingo e poderá haver um atraso na resposta às encomendas de 5 dias úteis.

Iremos também encerrar a loja do Cacém entre 7 a 24 de maio. 

A loja de  Vila Nova de Gaia irá encerrar definitivamente no dia 22 de Abril e o stock é diferente deste site. Para mais informações sobre o stock de Gaia, confirme pelo email gaia.reprap@gmail.com se se tratar de outras informação o email correcto é o encomendas.reprap@gmail.com

Votos de boas impressões!

CPE Fillamentum 750gr

CPE HG100 Fillamentum - 1.75mm 750Gr - Ghost White

| Escrito por Gonçalo Jorge (C2) | Imprimir | Email | Acessos: 493

Fillamentum CPE (co-polyester) is a high-technical material for the FFF (also known as FDM) 3D printing technology. 

Engineered for quality and easy printing with features that will dwarf all PET based materials.

Characterized:

  • high impact strength (no break) and higher hardness
  • high tensile strength and thermal resistance
  • FDA approved and 100% recyclable material
  • BPA free and environmentally friendly
  • no warping, easy and clean printing
  • no odors or fumes while printing
  • stronger than PLA, durable as ABS
  • excellent layer to layer adhesion and adhesion to other materials with multi material printing
  • great transparency in thin layer
  • great chemical resistance

 

  • medical version available per request

(comparison made by publically accessible informations from other producers)

 

Diameter tolerance: +/- 0,05 mm
Working temperature: 255 - 275 °C
Hot bed: 70 - 80 °C
Weight: 750 g of filament (+ 250 g spool)

 

 

CPE HG100 Fillamentum - 1.75mm 750Gr - Ghost White
SKU 8595632830221
€34.99
Only 2 left in stock
Categoria: CPE Fillamentum 750gr

CPE CF112 Carbon - 1.75mm 600Gr

| Escrito por Gonçalo Jorge (C2) | Imprimir | Email | Acessos: 341

CPE CF112 Carbon is a high-tech material for the FFF (also known as FDM) 3D printing technology.

Carbon fibers reinforced CPE HG100 filament is developed for its pressure resistance, hardness and surface effect.

 

  • Good interlayer adhesion, easy printing, low warping
  • Matte finish
  • Wear resistance, resistant to long-term load
  • Chemical resistance
  • Recyclable, bio-based, BPA free, styrene free
  • It's hardness comparable to Vinyl 303
  • High-technical durable long-life material

 

Diameter tolerance: +/- 0,1 mm
Working temperature: 255 - 275 °C
Heated bed: 70 - 85 °C
Weight: 600 g of filament (+ 230 g spool)
RAL: N/A
Pantone: N/A
CPE CF112 Carbon - 1.75mm 600Gr
SKU 8595632828105
€52.00
Categoria: CPE Fillamentum 750gr

CPE HG100 Fillamentum - 1.75mm 750Gr - Flirty Plum

| Escrito por Gonçalo Jorge (C2) | Imprimir | Email | Acessos: 4439

 

 

 

Fillamentum CPE (co-polyester) is a high-technical material for the FFF (also known as FDM) 3D printing technology. 

Engineered for quality and easy printing with features that will dwarf all PET based materials.

Characterized:

  • high impact strength (no break) and higher hardness
  • high tensile strength and thermal resistance
  • FDA approved and 100% recyclable material
  • BPA free and environmentally friendly
  • no warping, easy and clean printing
  • no odors or fumes while printing
  • stronger than PLA, durable as ABS
  • excellent layer to layer adhesion and adhesion to other materials with multi material printing
  • great transparency in thin layer
  • great chemical resistance

 

  • medical version available per request

(comparison made by publically accessible informations from other producers)

 

Diameter tolerance: +/- 0,05 mm
Working temperature: 255 - 275 °C
Hot bed: 70 - 80 °C
Weight: 750 g of filament (+ 250 g spool)

 

 

CPE HG100 Fillamentum - 1.75mm 750Gr - Flirty Plum
SKU CPE_HG100_Fillamentum_-_1_75mm_750Gr_-_Flirty_Plum
€34.99
Only 2 left in stock
Categoria: CPE Fillamentum 750gr

CPE HG100 Fillamentum - 1.75mm 750Gr - Army Green

| Escrito por Gonçalo Jorge (C2) | Imprimir | Email | Acessos: 4386

 

 

 

Fillamentum CPE (co-polyester) is a high-technical material for the FFF (also known as FDM) 3D printing technology. 

Engineered for quality and easy printing with features that will dwarf all PET based materials.

Characterized:

  • high impact strength (no break) and higher hardness
  • high tensile strength and thermal resistance
  • FDA approved and 100% recyclable material
  • BPA free and environmentally friendly
  • no warping, easy and clean printing
  • no odors or fumes while printing
  • stronger than PLA, durable as ABS
  • excellent layer to layer adhesion and adhesion to other materials with multi material printing
  • great transparency in thin layer
  • great chemical resistance

 

  • medical version available per request

(comparison made by publically accessible informations from other producers)

 

Diameter tolerance: +/- 0,05 mm
Working temperature: 255 - 275 °C
Hot bed: 70 - 80 °C
Weight: 750 g of filament (+ 250 g spool)

 

 

CPE HG100 Fillamentum - 1.75mm 750Gr - Army Green
SKU CPE_HG100_Fillamentum_-_1_75mm_750Gr_-_Army_Green
€34.99
Only 2 left in stock
Categoria: CPE Fillamentum 750gr

CPE HG100 Fillamentum - 1.75mm 750Gr - Grey Mouse Transparent

| Escrito por Gonçalo Jorge (C2) | Imprimir | Email | Acessos: 4553

 

 

 

Fillamentum CPE (co-polyester) is a high-technical material for the FFF (also known as FDM) 3D printing technology. 

Engineered for quality and easy printing with features that will dwarf all PET based materials.

Characterized:

  • high impact strength (no break) and higher hardness
  • high tensile strength and thermal resistance
  • FDA approved and 100% recyclable material
  • BPA free and environmentally friendly
  • no warping, easy and clean printing
  • no odors or fumes while printing
  • stronger than PLA, durable as ABS
  • excellent layer to layer adhesion and adhesion to other materials with multi material printing
  • great transparency in thin layer
  • great chemical resistance

 

  • medical version available per request

(comparison made by publically accessible informations from other producers)

 

Diameter tolerance: +/- 0,05 mm
Working temperature: 255 - 275 °C
Hot bed: 70 - 80 °C
Weight: 750 g of filament (+ 250 g spool)

 

 

CPE HG100 Fillamentum - 1.75mm 750Gr - Grey Mouse Transparent
SKU CPE_HG100_Fillamentum_-_1_75mm_750Gr_-_Grey_Mouse_Transparent
€34.99
Only 1 left in stock
Categoria: CPE Fillamentum 750gr

Sem produtos no carrinho.

Log-in

Artigos Recentes

Redes e Apoios

RepRap PT nas Redes Sociais: Facebook | Google + | Thingiverse | 3d Hubs | YouTube | Instagram

Redes de Download de modelos:  Thingiverse | YouMagine | Cults3D | GrabCAD

Aplicações modelação 3D: Blender 3D | FreeCAD | TinkerCAD | SketchUp (comercial) | SolidWorks (comercial) | 3DSMax (comercial)

Slicers: Sli3r | Cura | Simplify3D (comercial) | Outros

Informação Geral e Apoios

Apoios e parceiros: Projetos 3D | linuxtech | PTMakers

Quem Somos? | Política de Privacidade. | Termos e condições de uso.

Marcas: Prusa | e3D | Fillamentum | Buildtak | Lokbuild | BQ | Anet | Recreus | Sakata 3D 

Staticboards | Smart Materials 3D | Filkemp | Igus | Smooth-On | Icel | 3dlac | 3Doodler